Skip to content

05 Category playbooks

How do you develop a powdered drink mix?

Short answer

Develop a powdered drink mix by setting the serving size, mixing liquid, temperature and target taste, then testing wetting, dispersion, blend uniformity, moisture exposure and packaging. A powder that tastes good in a lab blender may still clump in a customer’s shaker. At JOI Labs, first physical samples typically arrive 5–7 days after a confirmed brief, depending on ingredient availability.

Define how the customer will actually prepare it

“Powdered drink mix” can mean a single-serve creamer stick, an oat-milk pouch or a flavored mix for a cold shaker. They require different particle properties, sweetness systems and packaging. Write the preparation instruction before choosing ingredients: grams of powder, volume and temperature of liquid, utensil or shaker, and how long the customer will tolerate mixing.

A clear brief also states intended claims, nutrition, flavor target, target finished-goods cost and pack-out. If the product must work in cold water, test in cold water. If it must foam in hot coffee, a room-temperature spoon test is not enough.

The tests that distinguish a sample from a product

Powder drink mix development checks
CheckWhat to observeWhy it matters
Taste after preparationFlavor, sweetness and off-notes in intended liquidThe powder is sold, but the drink is consumed
WettingHow quickly liquid reaches particlesPoor wetting creates floating powder and lumps
DispersionUniformity after the specified mixing methodNo blender should be required unless the label says so
Blend uniformitySamples from beginning, middle and end of a batchSmall ingredients can distribute unevenly
Moisture responseClumping, flow and quality in intended packageHumidity can change use and storage behavior
Ingredient identityGrades, allergens and supplier specsA substitute can change function or labeling

Tetra Pak’s powder-development materials list moisture, density, particle size, solubility, dispersibility, wettability and caking among the properties to assess. A separate blending guide warns that segregation can occur through conveying and packing even when the mixer produced a uniform batch.

Choose ingredients for the drink, not just the powder

Protein, cocoa, fiber, fat and minerals can change both taste and how a powder behaves in water. Fine particles may resist wetting; some powders form lumps when their outside hydrates faster than the center. Tetra Pak’s mixing overview describes this wetting problem and why the mixing method matters.

Do not promise “instant” based on a stirred bench sample. Compare the actual use condition against the approved reference. If you change protein grade or a carrier ingredient, retest dispersibility and flavor. If a stabilizer or anti-caking ingredient is proposed, evaluate the intended function and label impact; FDA lists common ingredient functions including anti-caking and emulsification.

A shorter list can be a smart target, but it does not excuse clumping, sediment or an inaccurate nutrition panel. Decide what matters most to the customer, then make the trade-off explicit.

Six design choices that move the project

  1. Liquid and temperature. Cold water, hot coffee and plant milk wet powders differently. Choose the main use case first.
  2. Serving size. An undersized scoop may not deliver your intended nutrition; an oversized one can be hard to mix.
  3. Particle behavior. Wettability, dispersibility and settling matter as much as the flavor concentrate.
  4. Production method. Dry blending, agglomeration and other processing choices affect cost and how the mix disperses. Do not lock a process before confirming the manufacturer’s line.
  5. Packaging. Sticks and pouches create different filling, handling and moisture-protection demands.
  6. Supplier consistency. Document ingredient grades and acceptance criteria; similar names do not guarantee similar powder properties.

Dry does not mean sterile

Low moisture can limit microbial growth, but it does not mean a contaminated powder is safe. FDA’s draft guidance on low-moisture ready-to-eat foods explicitly includes powdered drink mixes and discusses sanitation and contamination controls. The document is draft guidance, not a product approval. Work with the manufacturer on the food-safety plan applicable to the actual operation.

Storage and shelf-life statements need product-specific support. Choose a package that protects the powder in realistic distribution conditions, then confirm caking, flavor and other relevant attributes over time. A benchtop sample is not proof of a shelf-life claim.

How JOI Labs builds a powdered mix

Our Scoopables plant-milk powders and Pocketables creamer sticks are products we formulate, produce and sell. For your brand, the same lab can work from a brief or refine an existing mix. Wonka, our formulation engine, supports iterations against a library of thousands of verified ingredients. Master formulators make the calls and verify recommendations in physical samples.

Work follows the JOI Method: Formulate, Analyze, Comply, Source, Sample, Supply. Formula + Handoff typically runs $3,000–$5,000 depending on scope and gives you formula rights on final payment. Formula + Supply starts at $5,000 depending on the project, with an annual formula license and a buyout option. A portion of the development fee can be credited toward the first PO when category- and pack-out-dependent MOQ requirements are met.

First physical samples typically arrive in 5–7 days after a confirmed brief, depending on ingredient availability; production-ready formulas usually take 4–8 weeks. Third-party lab and shelf-life testing are passed through at cost with approval. Start with the brief checklist, then read what your manufacturer needs in the spec pack.

Example: from tasty powder to usable drink

Vanilla breakfast drink powderIllustrative example
Before

A fine powder tastes good from the lab blender but floats when stirred into cold water. The bottom of the pouch tastes sweeter than the top.

Development plan

Specify a cold-water spoon test; adjust particle behavior; verify samples throughout the blend and after filling; then evaluate the proposed pouch under moisture exposure.

Good flavor is necessary. Repeatable preparation and uniform production make it sellable.

Illustrative example based on a typical scope. Not a specific client project.

Questions founders ask

Why does my drink powder float or clump?

It may wet poorly or form a hydrated outer layer before liquid reaches the center. Tetra Pak describes how powder properties and mixing conditions affect lumps. Test the intended customer method.

Can I use one formula for hot and cold drinks?

Possibly, but test both conditions. A sample that disperses in hot coffee may not perform in cold water.

Do dry mixes need food-safety controls?

Yes, where applicable. FDA’s draft guidance discusses powdered drink mixes as low-moisture ready-to-eat foods; low moisture does not guarantee absence of contamination.

Should I choose a pouch or stick pack first?

Choose the use occasion and target serving, then confirm pack-out and manufacturer capabilities. The package can change filling and moisture-control requirements.

How much does JOI Labs charge for a powdered mix?

Formula + Handoff typically runs $3,000–$5,000 depending on scope. Formula + Supply starts at $5,000 depending on the project; part may be credited to the first PO when MOQ requirements are met. Third-party tests are separate.

Ready to make it real?

Send a brief. We'll come back with a proposal, a timeline and a path to your first sample.

Start a formulation brief

Sources

  1. Tetra Pak, Powder Product Development Centre
  2. Tetra Pak, Mixing and Blending
  3. Tetra Pak, Introduction to Mixing Technology
  4. FDA, Types of Food Ingredients
  5. FDA, Draft Guidance on Low-Moisture Ready-to-Eat Foods
Start a formulation brief